Our Decade line of Anti-Vibration gloves deliver as promised with tested and proven gel technologies and ergonomic design.

The most common tools at work sites are human hands. Whether operating power tools or heavy equipment, handling and moving materials of all sizes and shapes, assembling products from miniscule to massive, performing maintenance on everything from bicycles to jet aircraft, or any of a nearly infinite variety of jobs, our hands are the critical interface between us and our work. Keeping our hands fully functional means keeping them warm, dry, safe from abrasion and cuts, and protected from impact and vibration hazards.

Our Decade line of Anti-Vibration gloves deliver as promised with tested and proven gel technologies and ergonomic design.

Keeping our hands fully functional means keeping them warm, dry, safe from abrasion and cuts, and protected from impact and vibration hazards.

These workers are found in virtually every industrial classification but especially in manufacturing, mining and construction. As the use of vibrating equipment has increased in recent years, so has the incidence of various HAVS disorders. Vibration exposure can result in circulatory and nerve damage that is painful and permanent.

As the use of vibrating equipment has increased in recent years, so has the incidence of various HAVS disorders.

Glove Sizing: Measure around hand at the widest point of palm.

Sm: 7.5-8 in / 19-20 cm :: Med: 8-9 in / 20-23 cm :: Large: 9-10 in / 23-25.5 cm :: XL: 10-11 in / 25.5-28 :: XXL: 11-12 in / 28-30.5 cm

Supple cowhide shell gives excellent abrasion resistance and durability.

Bolton thumb insert, fluted fingers, tailored cut for full range of motion without fatigue. Kevlar stitching
provides burst-resistant seams.

 

 

Extended 4" width wrist support helps keep wrist in a neutral position while shielding against flying debris entering the glove.

Part Numbers: Left / Right:

49001 - XSmall - 49101

49002 - Small - 49102

49003 - Medium - 49103

49004 - Large - 49104

49005 - XLarge - 49105

Part Numbers: Left / Right:

49001W - XSmall - 49101W

49002W - Small - 49102W

49003W - Medium - 49103W

49004W - Large - 49104W

49005W - XLarge - 49105W

Kevlar stitching provides burst-resistant seams.
Supple cowhide shell gives excellent abrasion resistance and durability.

Full-finger Driver Style Gloves with patented Gfôm® palm/finger
pads meet American and international anti-vibration glove standard

ANSI S3.20-2002:ISO 10819:1996

Extended 4" width wrist support helps keep wrist in a neutral position.
Shields against flying debris entering the glove.

Driver Style AV Gloves with Gfôm®

Driver Style Gfôm® Gloves – Half-Finger

Half-finger gloves do not qualify for AV certification under the ANSI / EN/ISO standards because they are not full-finger. The Gfôm pads used in our half-finger gloves are the same, just missing the fingers. Note that vibration energy is transmitted through the fingers as well: certified full-finger gloves provide maximum protection.

These use the same top-grain cowhide shell and Gfôm pad as our full-finger version, but have half-length fingers when a particular job requires fingertip access. Bolton thumb insert, tailored cut for full range of motion without fatigue. Kevlar stitching for burst-resistant seams.

Part Numbers: Left / Right:

49201 - XSmall - 49301

49202 - Small - 49302

49203 - Medium - 49303

49204 - Large - 49304

49205 - XLarge - 49305

The extended 4" width wrist support helps keep wrist in a neutral position while shielding against flying debris entering the glove.

Part Numbers: Left / Right:

49201W - XSmall - 49301W

49202W - Small - 49302W

49203W - Medium - 49303W

49204W - Large - 49304W

49205W - XLarge - 49305W

The development of HAVS may be gradual, occurring over months or years, or a person may begin to feel tingling or numbness of the fingers within a few weeks. For most HAVS disorders, there is no medical cure.
Therefore, protecting workers and removing hazards is critical.

Wearing gloves to protect from vibration would seem to be an obvious solution, but simple fabric or leather gloves have basically no effect on vibration exposure. When sponge or foam materials are incorporated into gloves, they are inefficient at damping vibration. Visco-elastic materials perform better, but are still shown to be relatively inefficient, in some cases even amplifying vibration through human resonance. Hundreds of items are erroneously or deceptively labeled “anti-vibration”, but without testing and certification, those claims of reducing vibration are shaky at best.

Poster downloadable in English, Spanish and French.

Click the image for
a downloadable poster in English.

Spanish, click here

French, click here

Premium Style AV Gloves with Gfôm®

The extended safety cuff covers sleeve-ends to help keep out debris and sparks and allows for quick removal of glove.
Leather-over-foam pad gives extra protection over knuckles.

Full-finger Premium Style Gloves with patented Gfôm® palm/finger
pads meet American and international anti-vibration glove standard

ANSI S3.20-2002:ISO 10819:1996

Durable, abrasion-resistant top-grain cowhide outer glove offers heavier protection compared to our Driver style gloves. The extended safety cuff covers sleeve-ends to help keep out debris and sparks and allows for quick removal of glove. Leather-over-foam pad gives extra protection over knuckles. Kevlar® stitching for burst-resistant seams. Gunn-cut for correct fit helps promote proper grip while reducing hand fatigue.

Part Numbers: Left / Right:

49402 - Medium - 49502

49403 - Large - 49503

49404 - XLarge - 49504

49405 - XXLarge - 49505

Gloves are sold individually,
not as pairs.

Safety Cuff style

Durable, abrasion-resistant top-grain cowhide outer glove offers heavier protection compared to our Driver style gloves. Scoop-back sport cuff offers adjustable closure over wrist and open back for maximum comfort.

Leather-over-foam pad gives extra protection over knuckles. Kevlar® stitching for burst-resistant seams. Gunn-cut for correct fit helps promote proper grip while reducing hand fatigue.

Sport Cuff style

Part Numbers: Left / Right:

49802 - Medium - 49902

49803 - Large - 49903

49804 - XLarge - 49904

49805 - XXLarge - 49905

Gloves are sold individually,
not as pairs.

Scoop-back sport cuff offers adjustable closure over wrist and open back for maximum comfort.
Leather-over-foam pad gives extra protection over knuckles.

Durable, abrasion-resistant top-grain cowhide outer glove offers heavier protection compared to our Driver style gloves. Leather-over-foam pad gives extra protection over knuckles. Kevlar® stitching for burst-resistant seams. Gunn-cut for correct fit helps promote proper grip while reducing hand fatigue. Extended 4" width wrist support helps keep wrist in a neutral position while shielding against flying debris entering the glove.

Wrist Support style

Part Numbers: Left / Right:

49802W - Medium - 49902W

49803W - Large - 49903W

49804W - XLarge - 49904W

49805W - XXLarge - 49905W

Gloves are sold individually,
not as pairs.

Extended 4" width wrist support helps keep wrist in a neutral position.
Shields against flying debris entering the glove.

Premium Style Gfôm® Gloves – Half-Finger

Gunn-cut for correct fit helps promote proper grip.
Helps promote proper grip while reducing hand fatigue.

Part Numbers: Left / Right:

49602 - Medium - 49702

49603 - Large - 49703

49604 - XLarge - 49704

49605 - XXLarge - 49705

Gloves are sold individually,
not as pairs.

Durable, abrasion-resistant top-grain cowhide outer glove offers heavier protection compared to our Driver style gloves. Leather-over-foam pad gives extra protection over knuckles. Kevlar® stitching for burst-resistant seams. Gunn-cut for correct fit helps promote proper grip while reducing hand fatigue.

Half-finger gloves do not qualify for AV certification under the ANSI / EN/ISO standards because they are not full-finger. The Gfôm pads used in our half-finger gloves are the same, just missing the fingers. Note that vibration energy is transmitted through the fingers as well: certified full-finger gloves provide maximum protection.

Extended 4" width wrist support helps keep wrist in a neutral position while shielding against flying debris entering the glove.

Part Numbers: Left / Right:

49602W - Medium - 49702W

49603W - Large - 49703W

49604W - XLarge - 49704W

49605W - XXLarge - 49705W

Gloves are sold individually,
not as pairs.

gfom mini logo
Extended 4" shielding against flying debris entering the glove.
Extended 4" width wrist support helps keep wrist in a neutral position.

Believing that a material could be developed to meet the testing standards applied to vibration reduction materials, Chase Ergo, Inc. worked for more than two years with researchers in the United States and Scandinavia to develop what has become Gfom®.

This multi-part vibration-reducing pad was tested extensively in an independent European testing lab, enabling it to be CE-certified for its unique ability to reduce harmful vibration frequencies to levels specified in the ISO vibration-glove testing standard.

The ISO standard has been approved and adopted by both the American National Standards Institute (ANSI) and the ASA (Acoustical Society of America) and as of 2007 and is now numbered ANSI S2.73-2002 / ISO 10819: 1996 (R2007). This certification requires that material contained in a glove labeled "anti-vibration" must reduce vibration in the middle (31.5 - 200 Hz) and high frequency (200 - 1250 Hz) ranges produced by many power tools. The ISO/ANSI standard details the testing methods
to be used and the results that must be achieved by a glove claiming anti-vibration properties.

Summerweight AV Gloves with Gfôm®

Summerweight Gloves with patented Gfôm® palm/finger  pads
meet American and international anti-vibration glove standard

ANSI S3.20-2002:ISO 10819:1996

The Summerweight is a lighter, very comfortable glove which fully complies with and meets the requirements of the ANSI/EN/ISO testing standard for anti-vibration gloves.

It is constructed of supple goatskin and breathable Spandex for incredible flexibility in a certified anti-vibration glove. Gloves feature a gel pad under a goatskin strip for extra protection in the vulnerable thumb saddle area. Hook and loop closure.

Part Numbers: Pairs

52102 - Medium

52103 - Large

52104 - XLarge

52105 - XXLarge

Summerweight gloves
are sold as pairs.

Gloves feature a gel pad under a goatskin strip for extra protection in the vulnerable thumb saddle area. Hook and loop closure.
The Summerweight is a lighter, very comfortable glove which fully complies with and meets the requirements of the ANSI/EN/ISO testing.

Vibration Reducing Glove Liners

Our glove liners are essentially Gfôm® pads with spandex backs, providing a temporary transition for regular work gloves into
anti-vibration gloves.

The spandex back on our glove liners allows for full flexibility and comfortable fit. Two sizes fit a full range of hands and can be used in regular or specialty work gloves. It may be necessary for outer gloves to be one size larger to accommodate the Gfôm pad.

Full Finger

Part Numbers: Left / Right:

49031 - XS-M - 49131

49033 - L-XXL - 49133

Glove Liners are sold individually, not as pairs.

Our glove liners are essentially Gfôm® pads with spandex backs, providing a temporary transition for work gloves into anti-vibration glove.

Part Numbers: Left / Right:

49031W - XS-M - 49131W

49033W - L-XXL - 49133W

Glove Liners are sold individually, not as pairs.

A 4" width elastic wrist wrap combined with nylon stays helps support the wrist and maintain a neutral position.

A 4" width elastic wrist wrap combined with nylon stays helps support the wrist.
A 4" width elastic wrist wrap combined with nylon stays helps the wrist maintain a neutral position.

Wrist Support style

As with anti-vibration gloves, your best protection comes when coverage of the full fingers is included.

Half-finger glove liners allow for maximum flexibility and comfortable fit when using half-finger work gloves. Two sizes fit a full range of hands. It may be necessary for outer work gloves to be one size larger in order to accommodate the Gfôm pad.

Half Finger style

Part Numbers: Left / Right:

49231 - XS-M - 49331

49233 - L-XXL - 49333

Glove Liners are sold individually, not as pairs.

Half-finger glove liners allow for maximum flexibility and comfortable fit when using half-finger work gloves.

A 4" width elastic wrist wrap combined with nylon stays helps support the wrist and maintain a neutral position on this half-finger style.

Wrist Support style

Part Numbers: Left / Right:

49231W - XS-M - 49331W

49233W - L-XXL - 49333W

Glove Liners are sold individually, not as pairs.

A 4" width elastic wrist wrap combined with nylon stays helps support the wrist.
A 4" width elastic wrist wrap combined with nylon stays helps the wrist maintain a neutral position.

Take our half-finger Gfôm liner and add a soft, lightweight synthetic material palm to it for a light duty glove. The spandex back makes for great comfort and an easy fit into work gloves. Provides protection in the thumb crotch area.

Durable Palm

Part Numbers: Left / Right:

49431 - XS-M - 49531

49433 - L-XXL - 49533

Glove Liners are sold individually, not as pairs.

Take our half-finger Gfôm liner and add a soft, lightweight synthetic leather palm to it for a light duty glove.
The spandex back makes for great comfort and an easy fit into work gloves.

A 4" width elastic wrist wrap combined with nylon stays helps support the wrist and maintain a neutral position.

Wrist Support style

Part Numbers: Left / Right:

49431W - XS-M - 49531W

49433W - L-XXL - 49533W

Glove Liners are sold individually, not as pairs.

Our Durable Palm Gfôm liner with added protection over the knuckles for those with jobs requiring work in tight spaces. Top pad is layered gel and foam, covered with durable synthetic material. Also features our durable palm.

Riveter's Glove

Part Numbers: Left / Right:

49449 - XS-M - 49450

49451 - L-XXL - 49452

Riveter's gloves are sold individually, not as pairs.

Top pad is made with gel and foam, then covered with durable synthetic leather.
Our Durable Palm Gfôm liner with added protection over the knuckles for those with jobs requiring work in tight spaces.

A 4" width elastic wrist wrap combined with nylon stays helps support the wrist and maintain a neutral position.

Wrist Support style

Part Numbers: Left / Right:

49453 - XS-M - 49454

49455 - L-XXL - 49456

Riveter's gloves are sold individually, not as pairs.

A 4" width elastic wrist wrap combined with nylon stays helps support the wrist and maintain a neutral position.

Physical shock, impacts and sustained contact with hard or angular objects are hard on hands, potentially causing bruising or other contact-stress injuries. Our Gpact® technology reduces impact energy reaching the hands and provides a layer of padding to deal with rough objects and angular edges.

Shock/Impact Protection

Our half-finger Ultralight glove is all about comfort. Supple synthetic palm material bends easily with the hands.
Half-finger length allows for full finger dexterity and bare fingertip precision.

Ultralight Material Handler's Glove

Our half-finger Ultralight glove is all about comfort. Supple synthetic palm material bends easily with the hands. Half-finger length allows for full finger dexterity and bare fingertip precision. Features include Gpact® pad in palm, elastic closure for snug, flexible fit, durable synthetic leather palm, ribbed spandex back and soft absorbent material over the thumb for wiping a sweaty brow.

Part Numbers: Pairs

54431 - Small

54432 - Medium

54433 - Large

54434 - XLarge

54435 - XXLarge

Shock/Impact gloves
are sold as pairs.

Features include Gpact® pad in palm, elastic closure for snug, flexible fit, durable synthetic leather palm and more..

Ultralight Mechanic's Glove

Our full-finger Ultralight gloves provide very flexible protection. Supple synthetic palm material bends easily with the hands for full dexterity and excellent  fingertip precision. Features include Gpact® pad in palm, elastic closure for snug and flexible fit, durable synthetic leather palm, ribbed spandex back and soft absorbent material over the thumb for wiping a sweaty brow.

Part Numbers: Pairs

54531 - Small

54532 - Medium

54533 - Large

54534 - XLarge

54535 - XXLarge

Shock/Impact gloves
are sold as pairs.

Our full-finger Ultralight gloves provide very flexible protection. Supple synthetic palm material bends easily with the hands.
Features include Gpact® pad in palm, elastic closure for snug and flexible fit, durable synthetic leather palm.

Hand-Arm Vibration Syndrome (HAVS) affects millions of workers worldwide who use electric, gas and pneumatic power tools or stationary tools that transmit vibration to the worker’s hands. Long-haul drivers, heavy equipment operators or persons driving various utility vehicles also risk developing these disorders.

Gfom Vibration Reduction Products Logo

 

Decade® Anti-Vibration Gloves with Gfôm®

HOME

AV-DRIVER STYLE

AV-PREMIUM

AV-LINER/OTHER

SHOCK/IMPACT

TOP

©2016 Chase Ergo, Inc. :: Site Map :: Contact Us :: About Us