Decade Back Supports are made in New Mexico USA, the Land of Enchantment! Our back supports are designed to be worn low on the hips, supporting the lower back, not around the belly. Size dimensions are measured just below the navel:

XSmall: 23-27 in;  48-70 cm

Small: 28-32 in; 71-81 cm

Medium: 33-38 in ; 84-96 cm

Large: 39-44 in; 99-112 cm   
XLarge: 45-49 in; 114-124 cm

XXLarge: 50-54 in; 127-137 cm

3XLarge: 55-59 in; 140-150 cm

4XLarge: 60-63 in; 152-160 cm

Larger sizes available on styles noted. Upcharges apply. (Accupressure sizes differ. See listing for sizes)

Decade Back Supports are made in New Mexico USA, the Land of Enchantment.

Accupressure

Working with researchers from the Iowa
Spine Research Center of the Biomedical
Engineering Department at the University
of Iowa, we co-developed the Accupressure
back support. This design incorporates
knowledge of how the body reacts to sudden
loading caused by unexpected events such as
slips, trips or falls. One study has shown
that during such events, back muscles can
over-contract by as much as 70% –
potentially causing painful back injury.

High-density woven-elastic cinch straps give
consistently superior performance over
long-term use.

  • Triple Lock cinch feature for additional support when needed
  • 2-way stretch power knit primary belt
  • Number of orthopedic stays varies with belt size
  • Quick-release shoulder straps

Part Numbers:

48030 - XSmall : 23-27 in / 48-70 cm

48031 - Small : 28-32 in / 71-81 cm

48032 - Medium : 33-37 in / 84-94 cm

48033 - Large : 38-44 in / 96-112 cm

48034 - XLarge : 45-51 in / 114-130 cm

48035 - XXLarge : 52-56 in / 132-142 cm

48036 - 3XLarge : 57-62 in / 145-157 cm

Measure just below the navel.

Working with researchers from the Iowa 
Spine Research Center of the Biomedical 
Engineering Department at the University 
of Iowa.
This design incorporates 
knowledge of how the body reacts to sudden loading caused by unexpected events such as slips, trips or falls.

Lumbar Lock

Constructed with high density woven elastic cinch straps, the Lumbar Lock is designed

to provide consistent, long-lasting performance. 2-way-stretch power knit elastic forms the body of the support. Hook and loop closures give positive lock and highly adjustable sizing.  Primary belt width increases with belt size for best fit.

The number of orthopedic boning stays and length of the stays increase with belt size for strong custom support.  Triple-locking cinch strap provides extra support for planned lifts or when navigation trickier surfaces such as on construction sites. Adjustable shoulder straps, machine washable.

Part Numbers:

45030 - XSmall : 23-27 in / 48-70 cm

45031 - Small : 28-32 in / 71-81 cm

45032 - Medium : 33-38 in / 84-96 cm

45033 - Large : 39-44 in / 99-112 cm

45034 - XLarge : 45-49 in / 114-124 cm

45035 - XXLarge : 50-54 in / 127-137 cm

Measure just below the navel.

 

Larger sizes to 5XL and above may be custom ordered for the Lumbar Lock. Upcharges apply. Please call for details. No returns on sizes 3XL or larger.

 

45036 - 3XLarge : 55-59 in / 140-150 cm

45037 - 4XLarge : 60-63 in / 152-160 cm

45038 - 5XLarge : 64-67 in / 162-170 cm

Constructed with high density woven elastic cinch straps, the Lumbar Lock is designed to provide consistent, long-lasting performance.

Low Profile

The Low Profile is designed to provide durable, comfortable performance. Constructed with high density woven elastic cinch straps over 2-way-stretch power knit elastic which forms the body of the support. Hook and loop closures give positive lock and highly adjustable sizing. Primary belt width increases with belt size for best fit.

The number of orthopedic boning stays
and length of the stays increase with belt size for strong custom support. Adjustable shoulder straps, machine washable.

Part Numbers:

46030 - XSmall : 23-27 in / 48-70 cm

46031 - Small : 28-32 in / 71-81 cm

46032 - Medium : 33-38 in / 84-96 cm

46033 - Large : 39-44 in / 99-112 cm

46034 - XLarge : 45-49 in / 114-124 cm

46035 - XXLarge : 50-54 in / 127-137 cm

Measure just below the navel.

The Low Profile is designed to provide durable, comfortable performance.

Industrial

Industrial weight knit elastic cinch and shoulder straps provide long lasting durability. Molded HTH hook and loop closures for best performance. Primary belt width is 8”. The  number or spring steel boning stays increases with belt size.

Triple lock cinch feature allows wearer to tighten belt easily and offers additional support when handling heavier or awkward loads or traversing less-than-ideal surfaces such as on construction sites.  Rugged, durable support is washable.

Part Numbers:

46430 - XSmall : 23-27 in / 48-70 cm

46431 - Small : 28-32 in / 71-81 cm

46432 - Medium : 33-38 in / 84-96 cm

46433 - Large : 39-44 in / 99-112 cm

46434 - XLarge : 45-49 in / 114-124 cm

46435 - XXLarge : 50-54 in / 127-137 cm

Measure just below the navel.

Industrial weight knit elastic cinch and shoulder straps provide long lasting durability.

Cadet

Light duty industrial back support at a popular price. Ideal for temporary help, high turnover positions or light industrial activities. Knit elastic cinch and shoulder straps, two-way stretch power knit primary belt. Positive vertical locking system with two-way stretch binding and rubberized interior stay pockets.

 Number of orthopedic boning stays increases as belt size increases. High-rise cut in front means the belt can stay on when temporarily seated, such as when on a forklift or tractor. 8" tall in back; 6" tall in front. Adjustable shoulder straps.

Part Numbers:

46530 - XSmall : 23-27 in / 48-70 cm

46531 - Small : 28-32 in / 71-81 cm

46532 - Medium : 33-37 in / 84-94 cm

46533 - Large : 38-44 in / 96-112 cm

46534 - XLarge : 45-51 in / 114-130 cm

46535 - XXLarge : 52-56 in / 132-142 cm

Measure just below the navel.

Light duty industrial back support at a popular price. Ideal for temporary help, high turnover positions or light industrial activities.

Basic

Comfortable high-rise front panel “cutaway” design is comfortable when sitting or bending. Shoulder straps can be adjusted for most comfortable fit by adjusting position of strap ends against hook-and-loop at both front and back of support. Four sewn-in stays, 5” wide cinch straps, 1-1/4” wide elastic shoulder straps.

Part Numbers:

03430 - XSmall : 23-27 in / 48-70 cm

03431 - Small : 28-32 in / 71-81 cm

03432 - Medium : 33-38 in / 84-96 cm

03433 - Large : 39-44 in / 99-112 cm

03434 - XLarge : 45-49 in / 114-124 cm

03435 - XXLarge : 50-54 in / 127-137 cm

Measure just below the navel.

Comfortable high-rise front panel “cutaway” design is comfortable when sitting or bending.

Decade® Wrist & Elbow Supports

This wrist support fits either hand, allowing for managing less stock. The splint is preset at 15%, but can be user-adjusted to a desired angle. Cross-strap provides additional restriction to wrist movement if needed.

Part Numbers:

42201 - Small

42202 - Medium

42203 - Large

42204 - XLarge

To determine size, measure around the wrist at the smallest point.

Small : 5.5-6.5 in / 14-16.5 cm

Medium : 6.5-7.5 in / 16.5-19 cm

Large : 7.5-8.5 in / 19-21.6 cm

XLarge : 8.5-9.5 in / 21.6-24.1 cm

Ambi / Adjustable Angle Splint Wrist Brace

This wrist support fits either hand, allowing for managing less stock. The splint is preset at 15%.

Decade Wrist Supports and Braces provide support for wrists suffering from minor sprains or strains. We offer a range of options, from splinted braces which hold the wrist in fixed positions to those providing mild compression and support.

XSmall: 4.5-5.5 in / 11.4-14cm

Small: 5.5-6.5 in / 14-16.5 cm

Medium: 6.5-7.5 in / 16.5-19 cm

Large: 7.5-8.5 in / 19-21.6 cm

XLarge: 8.5-9.5 in / 21.6-24.1 cm

Measure around wrist at the smallest point.

Decade Elbow Sleeve and Tennis Elbow Braces provide a level of relief for strained elbows. The Sleeve is sized:

Small: 7-8 in / 17.8- 20.3 cm

Medium: 8-9 in / 20.3-22.9 cm

Large: 9-10 in / 22.9-25.4 cm

XLarge: 10-11 in / 25.4-27.9 cm

Measure around middle of elbow joint.

Low Profile Wrist Brace with Power Strap

This ambidextrous wrist support has no stays but uses a 4"-wide wrap-around power strap to place an immobilizing pad on either the top or bottom of the wrist. Slip-on support with a thumb hole locates the brace properly on the hand and wrist.

Sizes XSmall - XLarge

Part Numbers:

41500 - XSmall

41501 - Small

41502 - Medium

41503 - Large

41504 - XLarge

To determine size, measure around the wrist at the smallest point.

Small : 5.5-6.5 in / 14-16.5 cm

Medium : 6.5-7.5 in / 16.5-19 cm

Large : 7.5-8.5 in / 19-21.6 cm

XLarge : 8.5-9.5 in / 21.6-24.1 cm

uses a 4"-wide wrap-around power strap to place an immobilizing pad on either the top or bottom of the wrist.

Active Support Wrist Brace with Power Strap

Superb custom fit by using four hook and loop closures on primary panel. Immobilizer pad provides superior comfort while keeping the wrist in a neutral position.
4" elastic strap applies adjustable pressure around wrist.

Sizes XSmall - XLarge

Left and Right hand

Part Numbers (Left - Right):

41600 - XSmall - 41700

41601 - Small - 41701

41602 - Medium - 41702

41603 - Large - 41703

41604 - XLarge - 41704

To determine size, measure around the wrist at the smallest point.

XSmall : 4.5-5.5 in / 11.5-14 cm

Small : 5.5-6.5 in / 14-16.5 cm

Medium : 6.5-7.5 in / 16.5-19 cm

Large : 7.5-8.5 in / 19-21.6 cm

XLarge : 8.5-9.5 in / 21.6-24.1 cm

Superb custom fit by using four hook and loop closures on primary panel.

Slip-On Wrist Support

Shaped for excellent support over the carpal area. Provides gentle compression without restricting hand movement. Non-irritating seams.

Sizes Small - XLarge

Part Numbers:

41301 - Small

41302 - Medium

41303 - Large

41304 - XLarge

To determine size, measure around the wrist at the smallest point.

Small : 5.5-6.5 in / 14-16.5 cm

Medium : 6.5-7.5 in / 16.5-19 cm

Large : 7.5-8.5 in / 19-21.6 cm

XLarge : 8.5-9.5 in / 21.6-24.1 cm

Shaped for excellent support over the carpal area.

Slip-On Wrist Support with Thumb Hole

Fashion-shaped for gentle support over the carpal area. Thumb hole maintains position. Non-irritating seams.

Sizes Small - XLarge

Part Numbers:

41401 - Small

41402 - Medium

41403 - Large

41404 - XLarge

To determine size, measure around the wrist at the smallest point.

Small : 5.5-6.5 in / 14-16.5 cm

Medium : 6.5-7.5 in / 16.5-19 cm

Large : 7.5-8.5 in / 19-21.6 cm

XLarge : 8.5-9.5 in / 21.6-24.1 cm

Fashion-shaped for gentle support over the carpal area.

Seamless Slip-On Wrist Support

Circular-knit slip-on support provides gentle support over the entire carpal area. Thumb hole maintains position.

Sizes Small - XLarge

Part Numbers:

56201 - Small

56202 - Medium

56203 - Large

56204 - XLarge

To determine size, measure around the wrist at the smallest point.

Small : 5.5-6.5 in / 14-16.5 cm

Medium : 6.5-7.5 in / 16.5-19 cm

Large : 7.5-8.5 in / 19-21.6 cm

XLarge : 8.5-9.5 in / 21.6-24.1 cm

Thumb hole maintains position. Non-irritating seams.

4" Double Lock Wrist Wraps

Fits over full carpal area for firm support. Easy to put on and adjust. Unique double-lock hook and loop closure allows full adjustment of support.

Unisize and ambidextrous.

Black version uses vented elastic material.

Part Numbers:

40109 - Beige

40239 - Black

Fits over full carpal area for firm support. Easy to put on and adjust.
Unique double-lock hook and loop closure allows full adjustment of support.

40109

40239

4" Single Lock Wrist Wraps

The Black Economy Wrap (40139) is a 4" wide elastic strap with a single hook and loop closure. Ease of donning and wide coverage of the carpal area make this a great choice, offering medium restriction of wrist motion.

The 41038 wrap includes a thumb loop to position the wrap in the correct location. Comfortable under gloves, the wrap provides gentle restriction of wrist movement.

Part Numbers:

40139

41038

40139

41038

3" Single Lock Napped Wrist Wraps

3" wide cotton blend elastic wraps with napped finish accept hook all around for complete adjustability. Excellent replacement for elastic bandages or gauze wraps.

Unisize and ambidextrous.

Available in Beige or Grey.

Part Numbers:

40101 - Beige

40101-GR - Grey

3" wide cotton blend elastic wraps with napped finish accept hook all around for complete adjustability.
Excellent replacement for elastic bandages or gauze wraps.

40101

40101-GR

3" Knit Wrist Wraps

3" Knit Wrist Wrap with Thumb Loop provides very gentle restriction of movement with adjustable compression. Low bulk design. 41660BL.

40133 Wrap is 3" wide for quick wrapping and gentle restriction/compression over
most of the carpal area.

Part Numbers:

41660BL

40133

provides very gentle restriction of movement with adjustable compression. Low bulk design.
Wrap is 3" wide for quick wrapping and gentle restriction/compression over 
most of the carpal area.

41660BL

40133

2.25" Single Lock Wrist Wrap

42290BL Wrap is 2.25" wide, uses a single-lock hook and loop closure, and includes a thumb loop to hold its position on the wrist.

Part Number:

42290BL

 Wrap is 2.25" wide, uses a single-lock hook and loop closure, and includes a thumb loop to hold its position on the wrist.

Elbow Sleeve

This sized elbow sleeve provides comfortable pressure across and beyond the elbow joint to help relieve muscle soreness.

This sized elbow sleeve provides comfortable pressure across and beyond the elbow joint to help relieve muscle soreness. Neoprene construction retains warmth. Non-irritating single-seam structure. Approx. 7" length.

Sizes Small - XLarge.

Small: 7-8 in / 17.8- 20.3 cm

Medium: 8-9 in / 20.3-22.9 cm

Large: 9-10 in / 22.9-25.4 cm

XLarge: 10-11 in / 25.4-27.9 cm

Measure around middle of elbow joint.

Part Numbers:

56111 - Small

56112 - Medium

56113 - Large

56114 - XLarge

Tennis Elbow Brace

A tennis elbow brace provides compression over the muscles below the elbow to promote healing while still allowing work to be done. Fully adjustable brace lets the user customize compression to the desired level.

Both braces are made with 2" wide webbing. The Gfôm version utilizes our patented anti-vibration technology as a pad to protect against bumps.

Ambidextrous. One size fits all, up to 14"
(measure around arm just below the elbow).

Part Numbers:

43231 - Economy

43232 - Gfôm®

A tennis elbow brace provides compression over the muscles below the elbow to promote healing while still allowing work to be done.

Safety Eyewear

for Body Glove Safety Eyewear, click HERE

Decade Safety Eyewear offers a better approach to safety glasses by being different at their core. Our Decade eyewear is made with specially-treated polycarbonate which breaks down
when disposed of in a biologically-active landfill environment. Now you can feel even better about the safety glasses you wear as you wear them
and when it's time to replace them.

Plastics thrown into landfills may take hundreds of years or more to degrade. Our polycarbonate, ANSI Z87.1-2010-certified safety glasses were shown in lab testing to biodegrade an average of 25.9% in the first 469 days under conditions that simulate a biologically-active landfill, using the ASTM D5511-11 test.*

Actual biodegradation rates vary in landfills according to moisture levels. Present tests at ~ 45% solids content are representative of wetter landfills, such as those found in the Pacific Northwest and southeastern US.

*ASTM D5511-11 specifies: "This test method may also resemble some conditions in biologically active landfills where the gas generated is recovered and biogas production is even actively promoted."

Decade Bio™ Sosa style safety glasses.

At top in the photo is a new pair of glasses.

The discolored parts in the lower part of the photo are the remains of a pair after testing for 469 days. The test glasses are cut apart prior to testing to fit the test container.

Decade® Safety Glasses

In order to foster and encourage biodegredation, we’ve added a tiny amount of material to our plastic during manufacturing. Once the glasses are discarded, the additive's unique chemistry will attract hungry microbes to the surface of the glasses, and the bacteria will break them down to humus within a fraction of the time required to break down untreated plastic.

Don’t worry, unless you live 10 feet underground, with your head stuck in the dirt, our safety glasses won’t begin to disintegrate until they are buried in a landfill.

Decade Bio™ safety glasses meet the ANSI Z87.1-2010 (high impact) eyewear standard with tough polycarbonate frames and lenses to protect eyes from debris injury. The glasses provide 99.9% protection from UVA and UVB radiation and have a scratch-resistant coating.

Part Numbers:

70100 - Sosa Clear

70102 - Sosa Dark

 

70111 - SS Clear

70112 - SS Dark

Sosa Clear and Dark

SS Clear and Dark

Decade® Back Supports

HOME

BACK SUPPORT

WRIST SUPPORT

ELBOW BRACE

SAFETY EYEWEAR

TOP

©2016 Chase Ergo, Inc. :: Site Map :: Contact Us :: About Us